Uhm, logonserver is acting up?

So this is what logon server.exe says after world.exe loads completely:

Server Connection from 127.0.0.1:1291 DENIED, not an allowed IP.
Server Connection from 127.0.0.1:1292 DENIED, not an allowed IP.
Server Connection from 127.0.0.1:1293 DENIED, not an allowed IP.
Server Connection from 127.0.0.1:1294 DENIED, not an allowed IP.

So on and so forth....

So how do I get it so my friends can get online? I have no router, i did my hosting file, my external ip is the same as my internal ip. idk why, but it is. now here are my configs.

logon

Code:

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host      - The hostname that the database is located on
* LogonDatabase.Username  - The username used for the mysql connection
* LogonDatabase.Password  - The password used for the mysql connection
* LogonDatabase.Name      - The database name
* LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type      - Client to use. 1 = MySQL
* Not supported:          - 2 = PostgreSQL (Partly implemented)
* Not Supported:          - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
              Username = "root"
              Password = "ascent"
              Name    = "logon"
              Port    = "3306"
              Type    = "1">


/* Host Directive
*
*    This is the address that the realmlist will listen on.
*    To listen on all addresses, set it to 0.0.0.0
*    Default: 127.0.0.1 (localhost)
*
*    Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

/* Server console logging level
*
*    This directive controls how much output the server will
*    display in it's console. Set to 0 for none.
*    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*    Default: 3
*/

<LogLevel Screen = "0"
          File = "-1">

/* Account Refresh Time
*
*    This controls on which time interval accounts gets
*    refreshed. (In seconds)
*    Default = 600
*    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*   
*/

<Rates AccountRefresh = "600">

/* WorldServer Setup
*
*  RemotePassword
*    This directive controls the password used to authenticate with the worldserver.
*    It must be the same between the two configs. If it is not, your server will
*    not register.
*
*    Default: "change_me_logon"
*
*  AllowedIPs
*    This section MUST be completed, otherwise all attempts to link your servers will fail.
*    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
*    to make server connections to your logonserver, and register realms.
*    For example, everything in the 127.0.0.* range would be:
*        127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
*    To allow a single IP,
*        1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
*  AllowedModIPs
*    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
*    (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "xuious"
            AllowedIPs = "corruptwow.servegame.com/24"
            AllowedModIPs = "corruptwow.servegame.com/24">


Realms

Code:


/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
*    Address:
*      The address (no port) of the server.
*
*    Port:
*      The port on which the logon server listens. (*** NOT 3724 ***)
*
*    Name:
*      Not really relavant, but name the logon.
*
*    RealmCount:
*      The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "corruptwow.servegame.com"
   Port = "8093"
   Name = "Default Logon"
   RealmCount = "1">

/******************************************************
* Realm Section
*
*    Name:
*      The name of the realm.
*   
*    Address:
*      The address (and port) of that realm.
*
*    Icon:
*      The type of realm (PVP, Normal, RPPVP, RP)
*
*    TimeZone:
*      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
*      5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
*    Population:
*      (0 = low, 1 = medium, 2 = high)
*
*  Important information below
*
*    change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
*    This issues come up a lot!
*
*    Timezone values :
*   0=Korean                                16=China
*   1=Development            17=CN1
*   2=United States            18=CN2
*   3=Oceanic            19=CN3
*   4=Latin America            20=CN4
*   5=Tournament            21=CN5
*   6=Korean            22=CN6
*   8=English            23=CN7
*   9=German            24=CN8
*   10=French            25=Tournament
*   11=Spanish            26=Test Server
*   12=Russian            27=Tournament
*   13=Tournament            28=QA Server
*   14=Taiwan            29=CN9
*   15=Tournament            30=TestServer2
******************************************************/

<Realm1 Name = "Chaos"
   Address = "corruptwow.servegame.com:8129"
   Icon = "PVP"
   Population = "1.0"
   TimeZone = "1">


World:

Code:

/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
*  Database.Host      - The hostname that the database is located on
*  Database.Username  - The username used for the mysql connection
*  Database.Password  - The password used for the mysql connection
*  Database.Name      - The database name
*  Database.Port      - Port that MySQL listens on. Usually 3306.
*  Database.Type      - Client to use. 1 = MySQL
*  Not supported:    - 2 = PostgreSQL (Partly implemented)
*  Not Supported:    - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "character" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
*    Host
*        This is the address that the server will listen on.
*        To listen on all addresses, set it to 0.0.0.0
*        Default: 127.0.0.1 (localhost)
*
*    WorldServerPort
*        This is the port that the world server listens on.
*        It has to be the same as what is specified in the
*        realms table in the LogonDatabase.
*        Default: 8129
*
******************************************************/

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


/******************************************************
* Log Level Setup
*
*    Console Logging Level
*        This directive controls how much output the server will
*        display in it's console. Set to 0 for none, or -1 to disable.
*        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*        Default: 3
*
*    World server packet logging feature
*        If this directive is turned on, a file called `world.log`
*        will be created in the server's directory and all packets
*        sent and received by clients will be dumped here in bfg
*        format.
*        Default: 0
*
*    DisableCrashdumpReport
*        Disables crashdump reports, else if the build has debugging enabled,
*        arcemu-world will call ./arcemu-crashreport every time it starts, so
*        if there is a core, a crashdump will automatically be reported
*        to the tracker at sf.net
*        Needs gdb and curl
*        Linux only
*        Default: 0
*
******************************************************/

<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">


/******************************************************
* Server Settings
*
*    PlayerLimit
*        This directive controls the amount of sessions that will be
*        accepted by the server before it starts to add people to
*        the server queue.
*        Default: 100
*
*    Motd
*        This message will be displayed by the server in the chat
*        box every time any user logs on. Colors can be used in the
*        standard WoW format.
*        Default: "No MOTD specified
*
*    Send Stats On Join
*        This directive controls whether the server will send the online player
*        count to a cilent when it enters the world.
*
*    Breathing Setup
*        If the breathing code is causing problems or you want to run a fun server, you can disable
*        water checks by enabling this directive.
*        Default: 1
*
*    Seperate Channels Control
*        This directive controls whether horde and alliance chats will be seperated across channels.
*        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
*        across channels.
*        Default: 0
*
*    Compression Threshold
*        This directive controls the limit when update packets will be compressed using deflate.
*        For lower-bandwidth servers use a lower value at the cost of cpu time.
*        Default: 1000
*
*    Queue Update Rate
*        This directive controls how many milliseconds (ms) between the updates
*        that the queued players receieve telling them their position in the queue.
*        Default: 5000 (5 seconds).
*
*    Kick AFK Players
*        Time in milliseconds (ms) that a player will be kicked after they go afk.
*        Default: 0 (disabled)
*
*    Connection Timeout
*        This directive specifies the amount of seconds that the client will be disconnected
*        after if no ping packet is sent. It is advised to leave it at the default.
*        Default: 180
*
*    Realm Type
*        This is the realm type that will be used by the server to handle world pvp.
*        Default: 0 (pve)(RPPVE)
*        Other values: 1(pvp)(RPPVP)
*
*    AdjustPriority
*        Set the server to high process priority?
*        Default: 0
*
*    RequireAllSignatures
*        This directive controls whether the full 10 signatures will be required in order
*        to turn in a petition. Smaller servers would be better off having it turned off.
*        Default: off
*
*    ShowGMInWhoList
*        This directive controls whether GM's will be shown in player's who lists or not.
*        Default: on
*
*    MapUnloadTime
*        This directive controls whether to unload map cells after an idle period of <x> seconds.
*        Use on smaller servers or servers that are memory-limited. The server without cell unloading
*        can use over 1.2GB memory with all creatures loaded.
*        Default: 0
*
*    LimitedNames
*        This directive forces all character names to be a-z and A-Z compliant.
*        Default: 1
*
*    UseAccountData
*        This directive determines whether the account_data table is used to save custom client data.
*        May cause buggy behaviour.
*        Default: 0
*
*    AllowPlayerCommands
*        This directive, if enabled can allow players to use commands with a '0' command group.
*        Default: 0
*
*    EnableLFGJoin
*        If this is enabled, you can join the LFG channel without using the LFG tool.
*        Default: 0
*
*    TimeZone
*        Set your local timezone relative to GMT here.
*        Default: 0
*
*    Collision
*        Enable collision system (LoS checks).
*        Default: 0
*    Make sure you have collision.dll in the same folder as arcemu-world!
*
*    DisableFearMovement (In Battlegrounds and Arenas only!)
*        Disable fear movement in arenas & battlegrounds.
*        Recommended if you do not have collision enabled!
*        Default: 0 (off) Not blizzlike
*
*    SaveExtendedCharData
*        Enable saving extended data to characters table.
*        Recommended for armory type services.
*        Default: 0 (off)
*
******************************************************/

<Server PlayerLimit = "1000"
        Motd = "Welcome to Corrupt-WoW"       
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0"
        LimitedNames="1"
        UseAccountData="0"
        AllowPlayerCommands="0"
        EnableLFGJoin="0"
        TimeZone="0"
        Collision="0"
        DisableFearMovement="0"
        SaveExtendedCharData="0">

/********************************************************
* Announce Configuration
*
*    Tag
*      Configure what is shown in front of your announces in the [] brackets.
*      Default: Staff (would give [Staff])
*
*    GMAdminTag
*      Configure whether the <GM> or <Admin> tag is shown in announces.
*      Default: 0 (disabled)
*
*    NameinAnnounce
*      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
*      Default: 1 (enabled)
*
*    NameinWAnnounce
*      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
*      of the message.
*      Default: 1 (enabled)
*
*    ShowInConsole
*      This controls whether announces are shown in the arcemu-world console or not.
*      This does not apply for the team-internal GM announce.
*      Default: 1 (enabled)
*
********************************************************/
<Announce      Tag = "Staff"
                GMAdminTag = "0"
                NameinAnnounce = "1"
                NameinWAnnounce = "1"
                ShowInConsole = "1">

/******************************************************
* Power regeneration multiplier setup
*
*    These directives set up the multiplier in which regen values will be
*    multiplied by every 2 seconds.
*    Powers:
*        Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
*   
*    Reputation:
*        Kill = Rep gained on kill, Quest = rep gained from quests
*
*    Honor:
*        Honor = multiplier used to calculate honor per-kill.
*
*    PvP:
*        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
*        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
*
*    XP:
*        The xp that a player receives from killing a creature will be multiplied
*        by this value in order to get his xp gain.
*
*    RestXP:
*        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
*        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
*        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
*        Note that resting in a resting area (Zzz) goes 4 times faster.
*        Default: 1 (bubble every 8 hrs)
*
*    Drop(Color):
*        These values will be multiplied by the drop percentages of the items for creatures
*        to determine which items to drop. All default to 1.
*        To allow you better control of drops, separate multipliers have been created for items
*        of each quality group.
*
*    DropMoney:
*        This value will be multiplied by any gold looted and pickpocketed
*
*    Save:
*        Value in milliseconds (ms) that will be between player autosaves.
*        Default: 300000 (5 minutes)
*
*    SkillChance:
*        The chance that you have to level up a skill in melee or a profession is multiplied
*        by this value.
*        Default: 1
*
*    SkillRate:
*        The amount of "levels" your skill goes up each time you gain a level is multiplied
*        by this value.
*
*    ArenaMultiplier
*        Every week/day the arena points gained by a player will be multiplied by this value.
*
******************************************************/

<Rates Health="1"
      Power1="1"
      Power2="1"
      Power3="1"
      Power4="1"
      QuestReputation="1"
      KillReputation="1"
      Honor="1"
      PvPTimer="300000"
      ArenaQueueDiff="150"
      Compression="1"
      XP="1"
      QuestXP="1"
      RestXP="1"
      ExploreXP="1"
      DropGrey="1"
      DropWhite="1"
      DropGreen="1"
      DropBlue="1"
      DropPurple="1"
      DropOrange="1"
      DropArtifact="1"
      DropMoney="1"
      Save="300000"
      SkillChance="1"
      SkillRate="1"
      ArenaMultiplier2x="1"
      ArenaMultiplier3x="1"
      ArenaMultiplier5x="1">


/******************************************************
* GM Client Channel
*
*  This should be set to 'gm_sync_channel' for the My_Master addon to work.
*  Default: gm_sync_channel
*
******************************************************/

<GMClient GmClientChannel = "gm_sync_channel">


/******************************************************
* Terrain & Collision Settings
*
*  Set the path to the map_xx.bin files and whether unloading should be enabled
*  for the main world maps here. Unloading the main world maps when they go idle
*  can save a great amount of memory if the cells aren't being activated/idled
*  often. Instance/Non-main maps will not be unloaded ever.
*
*  Default:
*      MapPath = "maps"
*      vMapPath = "vmaps"
*      UnloadMaps = 1
*
******************************************************/

<Terrain MapPath = "maps"
        vMapPath = "vmaps"
        UnloadMaps = "1">


/******************************************************
* Log Settings
*
*    Cheaters:
*        This directive sets up the cheater logging file, if turned on any
*        cheat / packet exploit / speedhack attempts will be logged here.
*
*    GMCommands:
*        These two directives set up the GM command logging fie. If turned on,
*        most gm commands will be logged for this file for abuse investigation, etc.
*
*    TimeStamp:
*        Enables timestamps in logs.
*
******************************************************/

<Log Cheaters="0" GMCommands="0" TimeStamp="0">


/******************************************************
* Mail System Setup
*
*    These directives control the limits and behaviour of the ingame mail system.
*    All options must have Mail prefixed before them.
* 
*    ReloadDelay               
*        Controls the delay at which the database is "refreshed". Use it if you're
*        inserting mail from an external source, such as a web-based interface.
*        0 turns it off.
*        Default: 0
*
*    DisablePostageCostsForGM
*        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
*        Default: 1
*
*    DisablePostageCosts
*        Disables postage costs for all players.
*        Default: 0
*
*    DisablePostageDelayItems
*        Disables the one hour wait time when sending mail with items attached.
*        Default: 1
*
*    DisableMessageExpiry
*        Turns off the 30 day / 3 day after read message expiry time.
*        WARNING: A mailbox still cannot show more than 50 items at once
*        (stupid limitation in client).
*        Default: 0
*
*    EnableInterfactionMail
*        Removes the faction limitation for sending mail messages. Applies to all players.
*        Default: 1
*
*    EnableInterfactionMailForGM
*        Removes the faction limitation for sending mail messages, but only applies
*        to GM's. EnableInterfactionMail overrides this.
*        Default: 1
* 
******************************************************/

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


/******************************************************
* Status Dumper Config
*
*        These directives set up the status dumper plugin. Filename is an
*        absolute or relative path to the server binary. Interval is the
*        time that the stats will be dumped to xml.
*        Default: stats.xml / 120000 (2 minutes)
*
******************************************************/

<StatDumper FileName = "stats.xml" Interval = "120000">


/******************************************************
* Startup Options
*
*    Preloading
*        This directive controls whether the entire world will be spawned at server
*        startup or on demand. It is advised to leave it disabled unless you are a
*        developer doing testing.
*        Default: off
*
*    Background Loot Loading
*        This directive controls whether loot will be loaded progressively during
*        startup or in the background in a seperate thread. Turning it on will
*        result in much faster startup times.
*        Default: on
*
*    Multithreaded Startup
*        This controls whether the server will spawn multiple worker threads to
*        use for loading the database and starting the server. Turning it on
*        increases the speed at which it starts up for each additional cpu in your
*        computer.
*        Default: on
*
*    Additional Table Binding
*        You can load static item/creature/etc data into the server using this directive.
*        This way throughout database updates your custom data can be preserved.
*        Format: "sourcetable destination table,sourcetable destinationtable"
*        Example: "myitems items,mynpcs creature_names"
*        Default: ""
*
******************************************************/

<Startup Preloading = "0"
        BackgroundLootLoading = "1"
        EnableMultithreadedLoading = "1"
        LoadAdditionalTables="">

/******************************************************
* Flood Protection Setup
*
*    Lines
*        This is the number of "messages" or lines that it will allow before stopping messages from
*        being sent. This counter is reset every "Seconds" seconds.
*        Default: 0 (disabled)
*
*    Seconds
*        This is the number of seconds inbetween the Line counter being reset.
*        Default: 0 (disabled)
*
*    SendMessage
*        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
*        message will be sent upon flood triggering.
*        Default: 0
*
******************************************************/

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


/******************************************************
* LogonServer Setup
*
*    DisablePings 
*        This directive controls whether pings will be sent to the logonserver to check
*        if the connection is still "alive". Expect problems if it is disabled.
*        Default: 0
*
*    RemotePassword
*        This directive controls the password used to authenticate with the logonserver.
*        It must be the same between the two configs. If it is not, your server will
*        not register.
*
******************************************************/

<LogonServer DisablePings = "0"
            RemotePassword = "xuious">


/******************************************************
* AntiHack Setup
* Note: Most of this doesn't work as it should.
*
*    Teleport 
*        This directive controls anti-teleport hack checks will be enabled or not.
*        Default: 1
*
*    Speed
*        This directive controls anti-speed hack checks will be performed on player movement or not.
*        Default: 1
*
*    SpeedThreshold
*        This directive controls the threshold at which the speedhack detection will trip.
*        It's (characters' move time of distance - real move time of distance)
*        Default: -600.0
*
*    FallDamage
*        This directive controls anti-fall damage hack checks will be performed on player movement or not.
*        Default: 1
*
*    Flying
*        This directive controls whether flight hacks will be performed on players or not.
*        Default: 1
*
*    FlightThreshold
*     This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
*     Default: 10
*
*    DisableOnGM
*        This directive controls hack checks will be disabled for GM's or not.
*        Default: 0
*
******************************************************/

<AntiHack Teleport="1"
          Speed="1"
          FallDamage="1"
          Flight="1"
     FlightThreshold="10"
          DisableOnGM="1">


/******************************************************
* Period Setup
*
*    These are the periods that the server will wait before doing periodic duties. At the moment only
*    arena point calculation and honor point calculation are used here.
*
*    Default:
*        Arena: weekly
*        Honor: daily
*            (blizzlike values)
*
******************************************************/

<Periods HonorUpdate="daily"
        ArenaUpdate="weekly"
        DailyUpdate="daily">


/******************************************************
* Channels Setup
*
*    These directives control some of the aspects in the channel system.
*
*    BannedChannels
*        If you would like to ban users from creating or joining a channel specify them here in a ';'
*        seperated list.
*        Default: ""
*
*    MinimumLevel
*     Channel names that require a minimum level of 10 to talk, seperate names by ;
*     Default: ""
*
*
******************************************************/

<Channels BannedChannels=""
          MinimumLevel="">

/******************************************************
* Remote Console Setup
*
*    These directives control the remote administration console.
*
*    Enabled
*        If you want to enable the remote administration console, set this.
*        Default: 0
*
*    Host
*        This is the interface the RA server listens on.
*        Default: "0.0.0.0"
*
*    Port
*        This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
*        Default: 8092
*
******************************************************/

<RemoteConsole Enabled="0"
              Host="0.0.0.0"
              Port="8092">
     

/******************************************************
* Scripting Engine Setup
*
*    ArcEmu can support multiple script backends via the means of loading .dll files for them.
*    This section in the config can enable/disable those backends.
*
*    LUA
*        If you would like to enable the LUA scripting backend, enable this.
*        Default: 0
*
******************************************************/

<ScriptBackends LUA="1">


/******************************************************
* Movement Setup
*
*    NOTE: For any of these directives to function, movement compression has to be compiled into
*          the server.
*
*    FlushInterval
*        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
*        If you have a high threshold, keeping this at 1-2 seconds will work better.
*        Default: 1000 (one second)
*
*    CompressionRate
*        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
*        Range: 1-9 (or 0 is disable)
*        Default: 1
*
*    CompressionThreshold
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. It is advised to keep it at least 30 units. This value is used for players.
*        Default: 30.0
*
*    CompressionThresholdCreatures
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. This value is used for creatures, so it can be a lot lower.
*        Default: 10.0
*
******************************************************/

<Movement FlushInterval="1000"
          CompressRate="1"
          CompressThreshold="30.0"
          CompressThresholdCreatures="10.0">


/******************************************************
* Localization Setup
*
*    LocaleBindings
*        This is a list of locale names and the other locale you want to associate with them.
*        For example, to make the European client always use the french language, "enGB=frFR"
*
*        Must be terminated by a space.
*
*        Default: ""
*
******************************************************/

<Localization LocaleBindings="">


/******************************************************
* Dungeon / Instance Setup
*
*    TakeGroupLeaderID
*        If a player doesn't have an instance id, the group isn't already assigned
*        to an instance and the group or raid leader already have one, the player will
*        be bound to the instance id of the group/raid leader.
*        Default: 1 (enabled)
*
*    SlidingExpiration
*        If enabled, persistent instances will expire relative to the creation time.
*        Otherwise persistent instances will expire at fixed points of time. (blizz like)
*        Default: 0 (disabled)
*
*    DailyHeroicInstanceResetHour
*        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
*        Default: 5
*
*    CheckTriggerPrerequsites
*        Entering & checks
*        Default: 1
******************************************************/

<InstanceHandling TakeGroupLeaderID="1"
                  SlidingExpiration="0"
                  DailyHeroicInstanceResetHour="5"
                  CheckTriggerPrerequsites="1" >


/******************************************************
* BattleGround settings
* Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
*
*    AlteracValley
*    AV_MIN
*    AV_MAX
*
*    ArathiBasin
*    AB_MIN
*    AB_MAX
*
*    WarSong
*    WS_MIN
*    WS_MAX
*
*    Eyes Of The Storm.
*    EOS_MIN
*    EOS_MAX
*
******************************************************/
<Battleground AV_MIN="0"
              AV_MAX="40"
              AB_MIN="4"
              AB_MAX="15"
              EOS_MIN="4"
              EOS_MAX="15"
              WS_MIN="2"
              WS_MAX="10"
              SOTA_MIN="10"
              SOTA_MAX="15">

/*****************************************************
*    Arena Settings
*
*    Allows you to control current season and its progress.
*
*    Season - has to be higher than 0 for arenas to work.
*    Progress - sets the progress, 0 = finished, 1 = in progress
*
*****************************************************/
<Arena Season = "8"
      Progress = "1">

/*****************************************************
*    StartOnGMIsland
*
*    Makes GM Characters start on GM Island
*
*    Also sets their bind location to GM Island
*    Default:1 (Yes)
*
*****************************************************/
<GameMaster StartOnGMIsland = "1">

/*****************************************************
* Limits settings
*
*    Enable
*        Enable damage/hp/mana caps
*        Default value: 1 (enabled)
*    AutoAttackDmg
*        Maximum damage allowed for auto-attack (swing)
*        Default value: 10000
*    SpellDmg
*        Maximum damage allowed for a spell
*        Default value: 30000
*    Health
*        Maximum health allowed for a player
*        Default value: 100000
*    Mana
*        Maximum mana allowed for a player
*        Default value: 80000
*    Disconnect
*        Disconnect player that exceeds limits above
*        Default value: 0 (disabled)
*    BroadcastGMs
*        Broadcast a message to online GMs when max damage/hp/mana has been exceeded (possible cheating)
*        Default value: 1 (on)
*
* Set any of the values above to 0 to disable that setting (for example, set SpellDmg="0" to disable only spell damage limit)
*
*****************************************************/

<Limits Enable="1" AutoAttackDmg="10000" SpellDmg="30000" Health="100000" Mana="80000" Disconnect="0" BroadcastGMs="1">



Please help me :[ I want my server online